Thermostat "Excel" - UTH - 200

1. Display:
The display always shows the current temperature or time mode.

Pressing the ▼ or ▲ buttons the display shows the set temperature or set time mode, then they can be changed with the same keys ▼ or ▲ until you want.

Display - scale:
While rabotipri thermostat temperature operation, the scale is moving in the left side and the inscription "ON"
While the thermostat is pokoypri temperature operation, the scale is stopped in the left side and the inscription "OFF"
While the thermostat rabotipri Time mode, the scale is moving in the left side and the inscription "TIMERON"
While the thermostat is pokoypri Time mode, the scale is stopped in the left side and the inscription "TIMEROFF"

2. Major keys

"Power" - Turn the thermostat.

"▼ or ▲" - Changing the operating temperature or time mode. Holding the button ▲ or ▼ for a few seconds, resulting in the display text of the specified operating temperature or time mode. The same keys ▼ or ▲ to change the values ​​you want.
A few seconds after you have completed the changes and do not touch the thermostat, he began to work on newly set values​​.

"Padlock" - lock other buttons (Child Protection). Activation and de-activation hold the button for a few seconds.

Modes

1. SENSOR MODE - Temperature mode.

To use the thermostat temperature in operation, be sure to place the temperature sensor of the thermostat and stick the other end of the heating foil.

The display always shows the current temperature

Change the set operating temperature should hold the ▼ or ▲ button for a few seconds. This leads to the release and to display and the same keys ▼ or ▲ to change the values ​​you want.

Additional settings in the operating temperature

Change, the settings of additional work - done by simultaneously pressing buttons
"▼ and ▲"

By simultaneously pressing the buttons "▼ and ▲" for about 3 sec display shows "STN".

By pressing the buttons "▼ or ▲" go to "SEN"

Confirm by simultaneously pressing the buttons "▼ and ▲", the display shows
"T - L"

By pressing the buttons "▼ or ▲" you can see all the possibilities for individual adjustment offered by the thermostat.

To make an adjustment to any of the settings, press "▼ or ▲" until you go to it, and then confirm by simultaneously pressing the buttons "▼ and ▲".

Once you have made the desired adjustment, save your changes by simultaneously pressing the buttons "▼ and ▲".

T - L: Sets the range of the minimum temperature. Limit below which the thermostat can not be adjusted.

T - H: Sets limits the maximum temperature. Limit above which the thermostat can not be adjusted.

DIF; DLY; OHT; RES; SAU- are system features that are set at the factory and it is not desirable to be changed in order to correct and economical operation of the thermostat.

2. Function TIMER MODE - Time mode.

To use the thermostat in time mode, be sure to remove the temperature sensor.

In time mode, the thermostat can operate in 10 different time modes.
Each timer is 3 minute cycle.
The difference between them is the time to work and rest distributed in those three minutes.

Change the time mode - by pressing the buttons "▼ or ▲"

Additional settings for time mode.

Changing the time cycle to work - done by simultaneously pressing the buttons "▼ and ▲"

By simultaneously pressing the buttons "▼ and ▲" for about 3 sec display shows "STN".
By pressing the buttons "▼ or ▲" go to "TIN"
Confirm by simultaneously pressing the buttons "▼ and ▲", the display shows 03 min. (The default cycle time of operation).
By pressing the buttons "▼ or ▲" change to your desired time frame to work.
Once you have made the desired adjustment, save your changes by simultaneously pressing the buttons "▼ and ▲".

Time mode - UTH 200 in one minute cycle, "S" = 1

regime

Enabled (ON)

Switched off (OFF)

   Remarks

1L

15 sec. x S

45 sec. x S

"S" - selected cycle time in minutes

2L

20 sec. x S

40 sec. x S

3L

25 sec. x S

35 sec. x S

Seconds in the table are multiplied by "S"

4L

30 sec. x S

30 sec. x S

5L

35 sec. x S

25 sec. x S

In one minute, "S" = 1

6H

40 sec. x S

20 sec. x S

In five minutes, "S" = 5

7H

45 sec. x S

15 sec. x S

In ten minutes, "S" = 10

8H

50 sec. x S

10 sec. x S

9H

55 sec. x S

   5 sec. x S

10H

60 sec. x S

 0 sec. x S

EXAMPLE

Time mode - UTH 200 at cycle 10 minutes, "S" = 10

regime

Enabled (ON)

Switched off (OFF)

   Remarks

1L

15 sec. x 10 = 150 seconds.

45 sec. x 10 = 450 seconds.

Seconds in the table are multiplied by "10"

3. Reset the thermostat.

Reset the thermostat by pressing the power button "POWER" for 10 sec. Display three flashing symbol "SAU".
Then the thermostat has restored its original factory configuration and all of you made ​​previous changes were restored to original factory set.